skip to Main Content
SALES ENQUIRIES | AUS 1800 354 302 | NZ 0800 777 704

NDC MM710e MC Online Gauge

The MM710e multi-component on-line gauge for the Foods Industry has been developed to give highly accurate, simultaneous, real-time measurements of:

  • Moisture
  • Fat or Oil
  • Protein in a wide variety of foods applications.

The MM710e makes a complete measurement every 7.5 milliseconds which means that on a moving conveyor transporting food products, or in processes with rapid short term changes, optimum measurement resolution is achieved, enabling each MM710e measurement output to be used in closed loop process control (requires HMI or User Port – see Series 710e Devices).

What’s more, the MM710e has been engineered to measure even when there are changes to the process or ambient conditions such as:

  • Ambient lighting
  • Relative humidity
  • Product temperature
  • Product height fluctuation

Each MM710e features “SpeedCal”™, a factory-configured calibration for the specific measurements you require, to ensure no-compromise performance from the day it is installed. And to help adjust the MM710e to agree with your laboratory or primary reference method, GaugeToolsXL™ software is provided with each order.

NDC’s aim is to provide the best measurement solutions with the lowest cost of ownership. MM710e’s patented optics are a guarantee of long-term drift-free stability which means that your maintenance staff are not required – ever – to recalibrate the gauge.

The MM710e is a fully Ethernet Enabled System benefiting from a range of peripheral devices providing critical process information to supervisors and operators alike. Automatic Device Discovery makes creation, alteration and extension of networked gauging systems fast and convenient.

Digital connectivity to the process is available in all common formats including:

  • Ethernet IP
  • Modbus TCP
  • Profinet
  • DeviceNet
  • Profibus

The MM710e is used in conjunction with one or more 710e Peripheral Devices to facilitate data display, networking and process connectivity. Gauges and devices are Ethernet enabled and connect to each other via standard Cat5E cable and all run on 24V DC power.

For more information call 1800 354 302 (Australia) or 0800 777 704 (New Zealand).

Back To Top